| Customization: | Available |
|---|---|
| Type: | Gravity Separator |
| Voltage: | 380V |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Application of spiral chute:
spiral chute is gravity separating device.It's suitable for separating different proportions non-ferrous metal,rare metal and non-metallic minerals.
such like: iron ore,gold ore, ilmenite,chromite,pyrites,zircon,rutile,monazite,phosphorite,tungsten ore,tine,tantalum,
niobium ore and so on.
Working principle:
Spiral Chute is working under the force of water flow, gravity, inertial centrifuge and friction. Slurry is pumped to the top of the spiral , and it enters a feed distributor that evenly distributes the feed to each spiral concentrator. The design and shape of the spiral make it work, when combined with gravitational acceleration. As the slurry travels the spiraling path down the spiral, mineral grains settle and start sorting according to size, density and to a lesser extend shape. Low density particles are carried with the bulk of the water towards the outside of the spiral , while particles with the greatest density migrate towards the inside of the spiral.
Advantages and features:
Reasonable structure and small occupation area
High recovery, high efficiency, and precise separation
Non-required power
Light in weight, anti corrosion, rust and wear resistant
Simple installation and Minimal maintenance requirements
Low operating cost and long working life
Reliable running with minimal operator attention
Strong adaptability to fluctuation of feeding amount, density, size and grade
The surface of corundum forms strong friction the concentration effect surpass plastic surface
Technical parameters of spiral chute:
| Model | outside diameter (mm) |
Inside diameter (mm) |
Pitch of screw |
Span ratio |
Gradient |
Number of threads |
Number of turns |
Max. feed size (mm) |
Mine density (%) |
Capacity (t/h) |
Area (m2) |
Height (m) |
| DI2000 | 2000 | 2000 | 1200 | 0.6 | 9 | 2-4 | 3.5 | 0.04-4 | 20-40 | 15-45 | 5.7 | 6.8 |
| DI1500 | 1500 | 1500 | 900 | 0.6 | 9 | 2-4 | 4 | 0.03-0.3 | 20-45 | 10-25 | 5.8 | 6.1 |
| DI1200 | 1200 | 1200 | 720 540 |
0.6 | 9 | 2-4 | 4-5 | 0.03-0.3 | 30-50 | 4-6 | 2 | 5.23 |
| L900 | 900 | 900 | 540 360 |
0.4 0.6 |
9 | 2-3 | 4-5 | 0.03-0.3 | 30-50 | 2-3 | 1.2 | 4 |
| LI600 | 600 | 600 | 390 360 |
0.4 | 9 | 1-2 | 4-5 | 0.02-0.2 | 30-50 | 0.8-12 | 0.5 | 2.6 |
| LI400 | 400 | 400 | 180 | 0.45 | 9 | 1-2 | 4-5 | 0.02-0.2 | 30-50 | 0.5-0.2 | 0.25 | 1.3 |
Pay attention to the picture above: it's a gravity separating production line. pictures shows the spiral chutes and shaking tables. After first gravity separating by the spiral chutes, some essence mineral are separated; The shaking tables could seprate the rest mineral and help reseparate it again.
The size of feeding material to the spiral chute should be 0.3-0.02mm.
spiral chute could be polyurethane coating,the materisl could be fiber glass according to your order.
){kind=link}