Energy-Saving Wet Overflow Ball Mill for Gold Ore Plant with Rubber Liner

• Type: Ball Mill
• Motor Type: AC Motor
• Motor Power: 1250kw
• Rotationl Speed: 20-22r/min
• Application: Metallurgy
• Materials: Gold
• Model NO.: MQY-3270
• Condition: New
• Name: Overflow Ball Mill
• Capacity: 30.2-148t/H
• Feeding Size: <25mm
• Discharging Size: 0.074-0.4mm
• Shell Thickness: 32mm
• Liner Plate: Rubber & Mn Alloy Steel
• Shell Material: Q235
• Color: as Your Requirement
• Transport Package: in Container
• Specification: 150t
• Trademark: citichl
• Origin: China
• HS Code: 8474209000
• Production Capacity: 100pieces/Year

Product Description

Energy-Saving Wet Overflow Ball Mill for Gold Ore Plant with Rubber Liner

Ball Mill is the key equipment for grinding materials to get the product as per the requirement of process, used widely in electric, ferrous (non-ferrous) metal, nonmetal mining, chemical & building material industries. 

1. Usage:
Raw material mill is used widely for grinding (both drying and grinding) cement raw material and other materials in building material, metallurgical, electric and chemical industries.

2. Sorts and Features:
a. Common Raw Mill It is used for small & medium-sized raw materials separating system outside the mill.
b. Air-swept Mill The feature of Air-swept mill is short and thick in shell, wide in diameter of inlet &outlet trunion, large in grate gap area of diaphragms between drying chamber & grinding chamber, no grate plate in mill outlet. therefore, air speed inside of mill could reach 5m/s due to small resistance and drying capacity is strong since large amout of hot air could get in.
c. Outlet Discharging & Lifting Cycle Mill Comparing with Air-swept mill, material, passing through the drying chamber, are discharged at the outlet of grinding chamber by mechanical way, and then fed into separator by elevator which would return the coarse material to mill again for cycle grinding.
d. Middle Discharging & Lifting Cycle Mill From the view of drying, it is the combination of Air-swept Mill & Outlet Discharging & Lifting Cycle Mill; from the view of grinding, I workssimilar to secondary stage cycle grinding system. At the front end, it has drying chamber with high drying efficiency. Materials are fed from mill inlet, returned material from separator are fed through mill inlet & mill outlet into rough grinding chamber & fine grinding chamber respectively.
 

Working principle of ball mill:
There are many grinding medium balls inside the continuous rotating drum (there are many rods inside the rod mill). The continuous feeding material is broken by the shooting balls which are coming from a certain height of the wall of the drum; The falling medium and material would produce irregular slip and roll during the rotation of the drum, and the material is pulverized fine by the grinding effect among medium, drum-lining and materials. The dynamic material level different is produced by continuous forced material charge and discharge, consequently more and more fine material is slow out from the drum, and finish the grinding process inside the drum. 

Technical parameter table:

Model	Cylinder		Feed size (mm)	Max. ball Loading (t)	Speed (r/min)	Capacity(t/h)	Discharging                size (mm)	Main Motor (KW)	Weight        (t)
	Diameter (mm)	Length (mm)
MQY-0918	900	1800	≤20	1.5	36-38	0.65-2	0.075-0.89	18.5	4.6
MQY-0930	900	3000	≤20	2.7	36	1.1-3.5	0.075-0.89	22	6.7
MQY-1224	1200	2400	≤25	3	36	1.5-4.8	0.075-0.6	30	11.9
MQY-1230	1200	3000	≤25	3.5	36	1.6-5	0.074-0.4	37	12.8
MQY-1245	1200	4500	≤25	5	32.4	1.6-5.8	0.074-0.4	55	13.8
MQY-1530	1500	3000	≤25	7.5	30	2.8-6.3	0.074-0.4	75	18
MQY-1545	1500	4500	≤25	11	30	3.8-9	0.074-0.4	110	21
MQY-1830	1830	3000	≤25	11.5	26.6	4.5-12.5	0.074-0.4	130	33
WQY-1845	1830	4500	≤25	15	26.8	6-15.5	0.074-0.4	155	35.5
MQY-2130	2100	3000	≤25	15	23.8	5.8-18	0.074-0.4	155	43
MQY-2136	2100	3600	≤25	18	23.8	6.8-22	0.074-0.4	180	47
MQY-2145	2100	4500	≤25	24	23.8	8-25	0.074-0.4	245	54
MQY-2230	2200	3000	≤25	18	21.3	6.9-23	0.074-0.4	180	48
MQY-2245	2200	4500	≤25	27	21.3	8.5-26.8	0.074-0.4	280	52
MQY-2430	2400	3000	≤25	23	21.3	7-26	0.074-0.4	245	51
MQY-2436	2400	3600	≤25	26	21.3	8.8-33.5	0.074-0.4	280	58
MQY-2445	2400	4500	≤25	30	21.6	11-42	0.074-0.4	320	69
MQY-2460	2400	6000	≤25	44	21.7	14.5-56	0.074-0.4	480	78
MQY-2736	2700	3600	≤25	33	20.7	11.7-54	0.074-0.4	400	86
MQY2740	2700	4000	≤25	38	20.7	13-60	0.074-0.4	450	92
MQY-2745	2700	4500	≤25	43	20.7	14.5-67.5	0.074-0.4	480	98
MQY-2750	2700	5000	≤25	48	20.6	16-75	0.074-0.4	500	106
MQY-2760	2700	6000	≤25	57	20.6	19.5-90	0.074-0.4	630	116
MQY-3040	3000	4000	≤25	47	19	16.5-78	0.074-0.4	500	108
MQY-3064	3000	6400	≤25	74	19	26-125	0.074-0.4	800	138
MQY-3245	3200	4500	≤25	59	18.2	21.6-95	0.074-0.4	630	126
MQY-3254	3200	5400	≤25	73	18.2	25.9-114	0.074-0.4	800	138
MQY-3270	3200	7000	≤25	93	18.2	30.2-148	0.074-0.4	1250	150
MQY-3645	3600	4500	≤25	75	18	24.3-136	0.074-0.4	1000	144
MQY-3650	3600	5000	≤25	86	18	28.1-151	0.074-0.4	1250	152
MQY-3660	3600	6000	≤25	102	18	32.4-181	0.074-0.4	1250	163
MQY-3685	3600	8500	≤25	131	18	45.8-256	0.074-0.4	1800	252
MQY-3867	3800	6700	≤25	130	17.4	40-230	0.074-0.4	1600	185.2
MQY-4060	4000	6000	≤25	126	16.9	40.5-226	0.074-0.4	1500	203
MQY-4067	4000	6700	≤25	136	16.9	45-252	0.074-0.4	1600	206
MQY-4361	4270	6100	≤25	144	15.7	46-258	0.074-0.4	1850	215
MQY-4564	4500	6400	≤25	172	15.6	54-306	0.074-0.4	2000	280
MQY-5064	5030	6400	≤25	216	14.4	68-386	0.074-0.4	2600	320
MQY-5083	5030	8300	≤25	266	14.4	88-500	0.074-0.4	3300	403
MQY-5565	5500	6500	≤25	264	13.8	95-550	0.074-0.4	4500	451.5
MQY-5585	5500	8500	≤25	335	13.8	108-615	0.074-0.4	4500	525

FAQ
Q: Are you a factory ? 
A:Yes,we are factory, which was established in 1981.
we are manufacture for Mining machines, such as large ball mills, kilns, rotary dryers and so on.
Q: Terms of Payment: 
A:30% of the total amount by TT as deposit, the balance to be paid by TT or L/C at sight before the machines leaving seller' factory.
100% irrevocable L/C at sight.
Q: Why Choose us?
1.Technical services
1.1 Design of production line and solutions according to buyer's requirement. 
1.2 In 7 days after the receipt of deposit, the seller shall provide related technical documents for equipment installation, in addition to those with special requirements.
1.3 Before delivery, the seller can modify the previous solutions according to buyer's requirement.